How to Convert a Cordless Drill Into a Corded One

How to Convert a Cordless Drill Into a Corded One? Find Out!

Last Updated on January 26, 2023

Are you looking for a way to get more use out of your cordless drill? Look no further! With our step-by-step guide, converting your cordless drill into a corded one is easy and efficient. No longer will you have to worry about running out of battery power when tackling home improvement projects – just plug in the new cord and enjoy endless hours of drilling away at whatever project needs doing! We’ll provide everything from what supplies are needed, safety tips on how to complete this conversion successfully, as well as the benefits that come with having an always ready corded version of your favorite tool. So if you’re ready to learn how to convert a cordless drill into a corded one – stay tuned!

Table of Contents:

What You Need to Convert a Cordless Drill into a Corded One

If you’re looking to convert your cordless drill into a corded one, there are some materials and tools that you will need. Firstly, an extension cord is necessary for this conversion process. This should be the same voltage as your drill, so make sure to check before purchasing. Secondly, wire cutters are needed in order to trim the ends of the extension cords. Electrical tape can also be used to cover up any exposed wires or connections after cutting them off from the end of the extension cord.

Thirdly, a screwdriver may come in handy when connecting all of these components together – depending on how your drill is set up it might require screws or other fasteners to secure everything together properly. Finally, if you’re not comfortable with electrical work then it would be best to consult a professional electrician who can help guide you through this process safely and correctly.

These are just some of the items that will be required when converting your cordless drill into a corded one – but remember safety first. Make sure all wiring is done properly and securely so that no accidents occur while using your newly converted tool. With these tips in mind, now you have everything needed for successful conversion.

Step-by-Step Guide on How to Convert Your Cordless Drill

Converting a cordless drill into a corded one is an easy and inexpensive way to get more use out of your existing tools. Here’s how you can do it:

1. Gather the necessary materials: You will need an extension cord, electrical tape, wire cutters or scissors, and a screwdriver.

2. Cut off the female end of the extension cord: Using either wire cutters or scissors, carefully remove the female end of the extension cord so that only two exposed wires remain.

3. Connect one wire to each terminal on your drill battery pack: Make sure that both wires are connected securely by wrapping them with electrical tape after they have been attached to their respective terminals on your drill battery pack.

4. Plug in the male end of the extension cord into an outlet: After connecting both ends of your modified extension cable to your drill battery pack, plug in its male end into any available wall outlet for power supply.

5 Test for proper operation before using it for drilling tasks: Before attempting any drilling tasks with this setup, make sure that everything is working properly by testing it first without actually drilling anything yet; just turn on your drill and check if it runs normally as expected from a regular powered tool (i.e., no unusual noises or vibrations).

Now you can enjoy extended usage time with unlimited power supply while still having access to all features and functions offered by most modern drills.

By following the steps outlined in this guide, you should be able to successfully convert your cordless drill into a corded one. Now let’s move on to some important safety tips when converting your cordless drill.

Safety Tips When Converting Your Cordless Drill

When converting your cordless drill into a corded one, safety should be your top priority. After all, you’re dealing with electricity and the potential for electric shock is real. Here are some tips to keep in mind when making this conversion:

Wear Protective Gear: Before attempting any type of electrical work, it’s important to wear protective gear such as rubber gloves and eye protection. This will help protect you from any possible electric shocks or flying debris.

Check Connections: Make sure that all connections are secure before use. Check the power source for loose wires or frayed cords and make sure everything is properly connected before plugging it in. If there is any doubt about the connection being secure, don’t take chances – have an expert check it out first.

Grounding: When connecting a corded drill to an outlet, make sure that it has been grounded correctly by checking for continuity between the ground wire and neutral wire on the outlet itself. This will ensure that if something goes wrong during operation, then current will not flow through you instead of going back into the ground where it belongs.

Avoid Overloading Outlets: It’s also important to avoid overloading outlets with too many appliances at once as this can cause sparks which could potentially lead to fires or other hazards if left unchecked. So always double-check how many devices are plugged into each outlet before using them together.

Once everything is connected up correctly and securely, test out your new setup by running a few drills without actually drilling anything yet just to get used to how things feel when they’re working properly. This way, if something does go wrong later on down the line, you’ll know what was supposed to happen beforehand.

Finally, always follow instructions carefully when converting your cordless drill into a corded one. These instructions usually come with either your specific model of drill or from whoever sold/installed it originally, so read them thoroughly before starting work on anything else related to this project.

Key Takeaway: When converting a cordless drill into a corded one, safety should be your top priority. Wear protective gear, check connections and grounding, avoid overloading outlets and always follow instructions carefully.

Benefits of Converting Your Cordless Drill Into a Corded One

Converting your cordless drill into a corded one can provide you with several benefits. Here are some of the advantages to consider when making this switch:

Increased Power Output:

Corded drills offer more power than their cordless counterparts, which is ideal for heavier-duty tasks such as drilling through concrete or metal. This increased power output means that jobs will be completed faster and with less effort. Additionally, the motor on a corded drill does not need to work as hard as it would if it were powering a battery-powered device, meaning that it won’t overheat and cause damage to itself or your project.

Longer Battery Life:

A corded drill eliminates the need for batteries altogether, which means that you don’t have to worry about running out of juice in the middle of a job. The lack of battery also means that there is no risk of damaging them by overcharging or leaving them idle for too long – both common issues with rechargeable batteries used in cordless tools.

No Need To Recharge Batteries:

As mentioned above, having no need to recharge batteries is an advantage offered by using a corded drill instead of its battery-powered counterpart. This saves time since there’s no waiting around while they charge up before use – just plug in and go. It also helps reduce costs associated with purchasing new batteries every few months due to wear and tear from regular use.

Less Maintenance Required:

The lack of moving parts on a corded tool significantly reduces the amount of maintenance required compared to those found on most modern day battery powered devices; all that is really needed is to check for any frayed cords or loose connections from time-to-time in order to ensure they remain safe and secure during operation.

Key Takeaway: Corded drills offer more power, longer battery life, no need to recharge batteries, less maintenance required and overall cost savings compared to their cordless counterparts.


In conclusion, converting a cordless drill into a corded one can be an easy and cost-effective way to get the most out of your existing tool. With this guide, you now have all the information you need to safely convert your cordless drill into a corded one with ease. So don’t wait any longer – start converting your cordless drill today and enjoy all the benefits that come with it!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top