Last Updated on January 22, 2023
Do you ever find yourself stuck in the shower with lukewarm water, wishing it was more powerful? Well, if you’re looking to make an electric shower more powerful, then look no further. In this blog post, we’ll be discussing a few tips and tricks that will help turn your regular electric shower into one of those luxurious power showers! From checking the water pressure to choosing the right type of shower head – there are lots of ways to make sure your electric shower is up-to-scratch. So let’s get started on our journey towards having a strong and satisfying hot or cold blast every time you step foot in your bathroom.
Table of Contents:
- Check the Water Pressure
- Choose the Right Shower Head
- Install a Pump
- Adjust the Temperature Control
- Conclusion
Check the Water Pressure
Water pressure is essential for electric showers to work properly. Without the right amount of water pressure, your shower won’t be able to produce enough hot or cold water, making it difficult to get a comfortable temperature.
Fortunately, checking the water pressure in your home is easy and can help you determine if an electric shower will work correctly in your bathroom.
To check the water pressure in your home, start by turning off all taps and appliances that use running water, such as washing machines and dishwashers. Then turn on one tap at a time until you reach the maximum flow rate – this should give you an indication of how much pressure there is in the system.
If the flow rate isn’t high enough, then you may need to consider installing a pump or booster set, which will increase the available head (pressure) of water from the mains supply into your property. This can also be beneficial if other areas within your house are suffering from low-pressure issues too, such as toilets not flushing properly or slow filling baths/sinks etc…
When choosing an electric shower, it is important to look for models with adjustable power settings. This ensures that they can compensate for any fluctuations in incoming main pressures due to changing demand levels throughout the day and night periods. This guarantees consistent performance regardless of what else might be happening elsewhere on the network at any given time.
Finally, always make sure that any new installation meets current regulations regarding minimum operating pressures before proceeding with the installation. These vary depending upon where you live but generally speaking, and most UK homes should have no problems meeting these requirements without needing additional pumps etc…
Checking the water pressure is a crucial step in ensuring that your electric shower has enough power to give you the desired experience. With the right information and tools, you can now move on to choosing the perfect shower head for your needs.
Choose the Right Shower Head
Shower heads come in a variety of shapes, sizes and styles. From rain showers to handhelds, there are plenty of options to choose from when it comes to finding the perfect shower head for your bathroom. But what should you look for when selecting one?
The first thing you need to consider is water pressure. The higher the water pressure, the more powerful your shower will be. If you have low water pressure in your home, then a high-pressure shower head can help increase power and make your experience much more enjoyable. It’s also important to think about how much space you have available in your bathroom – some larger rain showers may not fit into smaller bathrooms or those with limited space.
Next up is choosing between fixed or adjustable shower heads. Fixed models provide an even spray pattern that won’t change over time, while adjustable ones allow you to adjust the angle and direction of the spray depending on where it needs to go (e.g., towards a particular body part). Handheld models offer even greater flexibility as they can be used both as a stationary fixture or detached from its holder so that it can be moved around easily during use – great if someone else wants access too.
Finally, don’t forget about aesthetics. Shower heads come in all sorts of colours and finishes, so take some time browsing through different designs until you find one that suits both your style preferences and budget requirements perfectly.
Choosing the right shower head is essential to making your electric shower more powerful. With the correct choice, you can start to take advantage of the benefits a pump installation will provide.
Install a Pump
A pump is a device used to increase the pressure of water in an electric shower. It works by taking low-pressure water from the mains and boosting it up to a higher pressure, allowing for more powerful showers. This can be especially helpful if you live in an area with lower-than-average water pressure or have multiple outlets connected to your shower system.
When installing a pump, it’s important to consider the size of your plumbing system and how much power you need for your desired outcome. A larger pump will provide more power but may require additional installation work, such as rerouting pipes or adding new fittings. You should also check that any existing pumps are compatible with your current setup before making any changes.
Pumps come in two main types: positive displacement (PD) and centrifugal (C). PD pumps use pistons or diaphragms to move fluid through them, while C pumps use rotating impellers which create suction and push fluid outwards at high speeds. Both types can be used for increasing water pressure, but PD pumps tend to be quieter and more efficient than C models, making them ideal for domestic applications like showers where noise levels must remain low.
It’s also important to note that some electric showers already include built-in pumps, so there may not be any need for additional installation work depending on what type of model you have installed in your home already. If this is the case, then all you’ll need is a replacement part rather than having to purchase an entirely new unit altogether – saving both time and money.
Installing a pump is an effective way to increase the power of your electric shower, and by adjusting the temperature control, you can ensure that you get the perfect balance of heat and pressure.
Adjust the Temperature Control
Adjusting the temperature control of an electric shower can have a huge impact on its power. By simply turning the knob, you can easily adjust the amount of hot and cold water that is mixed together to get your desired temperature. This simple step can help you save energy and money while also making sure that your shower experience is as comfortable as possible.
When adjusting the temperature control, it’s important to remember not to turn it too far in either direction or else you could end up with scalding hot or freezing cold water coming out of your shower head. It’s best to start off by slowly turning the knob until you find a comfortable setting for yourself and then gradually increasing or decreasing it from there if needed.
Another thing to keep in mind when adjusting the temperature control is how much pressure will be coming out of your shower head at any given time. If you turn up the heat too high, this could result in a powerful jet-like stream which might be uncomfortable for some people – so make sure not to go overboard. On the other hand, if you lower it too much, there won’t be enough pressure for an enjoyable shower experience either.
Finally, always check that all parts are securely connected before using your electric shower after making adjustments; otherwise, they may become loose over time due to changes in pressure levels caused by different temperature settings being used frequently. Doing this regularly will ensure that everything remains safe and secure throughout use, giving peace of mind every time.
Conclusion
In conclusion, making an electric shower more powerful is not as difficult as it may seem. By following the steps outlined in this blog post, you can easily check your water pressure, choose the right shower head, install a pump and adjust the temperature control to make your electric shower more powerful. With these simple tips and tricks, you can enjoy a more powerful electric shower experience without any hassle!
Paul is the type of person who never met a problem he couldn’t fix. He can always be found tinkering with something in his house, even if it isn’t broken! His tips and tricks are often shared on our site. He’s the one you call when something breaks because he has been known to improvise fixes for everything from leaky faucets to malfunctioning dryers.