how to reset a microchip cat flap

How to Reset a Microchip Cat Flap: A Step-by-Step Guide

Last Updated on January 27, 2023

If you have a pet cat, then the chances are that you’ve heard of microchip cat flaps. These nifty pieces of technology allow your feline friends to come and go as they please without having to worry about them getting lost or wandering into places they shouldn’t be! But what happens when it’s time for a reset? Don’t fret – we’re here with an easy guide on how to reset a microchip cat flap so that your furry family member can get back in and out in no time! Keep reading for our top tips and troubleshooting advice.

Table of Contents:

What Is a Microchip Cat Flap?

A microchip cat flap is a pet door that uses your pet’s unique identification number to unlock the door. It works by reading the RFID (Radio Frequency Identification) chip implanted in your pet’s neck and unlocking the door when it recognizes its ID. This type of cat flap offers many benefits for both you and your furry friend, including convenience, security, and peace of mind.

Installing a microchip cat flap is an excellent way to keep both yourself and your beloved feline friends safe while also providing added convenience for everyone involved. So why not make life easier on yourself (and give yourself some much-needed peace of mind) by investing in one today?

 
Key Takeaway: A microchip cat flap provides convenience, security and peace of mind for both you and your pet.

How to Reset a Microchip Cat Flap

Resetting a microchip cat flap can be a tricky task, but with the right tools and know-how, it doesn’t have to be. Here are some tips for resetting your microchip cat flap:

Tools Needed:

Before you start, make sure you have all the necessary tools on hand. You will need a flathead screwdriver and an adjustable wrench or pliers. If your cat flap has been installed in glass or metal, you may also need a drill bit to create pilot holes for screws.

Step 1: Remove the Existing Cat Flap

Using the flathead screwdriver, remove any existing screws that secure the cat flap in place. Once all of the screws are removed, carefully pull out the old unit from its frame and set it aside for disposal later.

Step 2: Install New Cat Flap

Place your new microchip cat flap into position within its frame and use either an adjustable wrench or pliers to tighten up any loose screws that hold it in place securely. Make sure not to over-tighten them, as this could damage both the doorframe and/or plastic components of your new device.

Step 3: Program Your Microchip Cat Flap

a pet flap with cat paw sign

To program your new microchip cat flap correctly, follow these steps; First, press down on both buttons located on either side of the device simultaneously until they light up red (this indicates that programming mode is active). Then take each pet’s collar tag one by one and hold it close enough so that it registers with the reader inside – once done successfully, their LED lights should turn green, indicating successful registration. Finally, exit programming mode by pressing down both buttons again until they turn off completely – now only those pets registered will be able to access through this particular door.

Now test out if everything works properly by taking each pet’s collar tag one by one near enough so that it registers with the reader inside – if successful, then their LED lights should turn green, indicating correct operation. If not, then try reprogramming following the same steps above before calling customer service for further assistance if needed.

 
Key Takeaway: Resetting a microchip cat flap can be easy with the right tools and know-how. To reset: • Remove existing cat flap • Install new one • Program device using collar tags • Test for successful operation

Troubleshooting Tips

Battery Issues

If your microchip cat flap isn’t working properly, the first thing to check is the battery. If you haven’t changed it in a while, then this could be the cause of any issues. Make sure you use a good quality alkaline battery and replace it regularly according to manufacturer instructions. If your cat flap has an LED indicator light, this will usually indicate when the battery needs replacing, as it will start flashing or dimming.

Programming Issues

Another common issue with microchip cat flaps is programming errors which can occur if you have recently moved house or changed pets. To reprogramme your cat flap, simply press and hold down the reset button until all lights flash at once – this should take around 10 seconds – then follow manufacturer instructions on how to add new codes into memory. It’s important to make sure that each pet has its own unique code, so they don’t get confused.

Sensor Problems

a pet flap maintenance

Sometimes problems can arise due to sensor malfunctioning or misalignment, which can prevent cats from entering or exiting correctly through their microchip door. Check that there are no obstructions blocking the sensors, such as dirt or dust and also ensure that they are aligned correctly by following manufacturer instructions carefully. You may need to adjust them slightly depending on where your door is located in relation to other objects in order for them to work effectively again.

Cleaning & Maintenance

Finally, regular cleaning and maintenance of your microchip cat flap are essential for ensuring optimal performance over time. This includes wiping away any dirt build-up from both inside and outside of the unit using a damp cloth every few weeks, as well as lubricating moving parts with WD40 occasionally (following manufacturer guidelines). Doing these simple tasks regularly will help keep everything running smoothly.

Conclusion

With the right tools and some patience, you’ll have your pet’s access to their favourite spot restored in no time! So don’t let a malfunctioning microchip cat flap keep your furry friend from coming and going as they please – reset it today!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top