Last Updated on January 26, 2023
Accidents happen – and that includes spills, splashes, or even submersion of your cordless drill. If you’ve ever had the misfortune to experience a wet drill, don’t worry: there are some things on what to do if a cordless drill gets wet. In this blog post, we’ll explore what steps to take when dealing with an unexpected shower for your trusty power tool as well as how to prevent it from happening again in the future. So whether you accidentally dropped your cordless drill into the lake while fishing or simply spilled coffee on it during morning DIY projects – read on!
Table of Contents:
- What to Do When Your Cordless Drill Gets Wet
- How to Dry Out a Cordless Drill
- Preventing Future Water Damage
- Conclusion
What to Do When Your Cordless Drill Gets Wet
When your cordless drill gets wet, it’s important to take immediate action. If you don’t, the water can cause serious damage and even render the tool unusable. Here are some tips on what to do when your cordless drill gets wet:
Unplug Immediately:
The first thing you should do is unplug the power source from your cordless drill as soon as possible. This will help prevent any further damage from occurring.
Dry Out The Drill:
Once you have unplugged the power source, remove all of the components that may be affected by moisture such as batteries and other attachments. Dry out each component with a cloth or paper towel until no more moisture is visible. Make sure to pay special attention to areas like battery terminals and switches which are particularly vulnerable to water damage.
Check For Corrosion:
After drying out all of the components, check for signs of corrosion on metal parts such as screws and wires inside of the tool body itself. If there is any sign of corrosion present then it’s best to replace these parts before using your drill again in order to avoid any potential safety hazards down the line.
Clean All Parts Thoroughly: Once everything has been dried off and checked for corrosion, clean all parts thoroughly with an appropriate cleaning solution or lubricant oil before reassembling them back into place within your cordless drill body once again. This will help ensure that no dirt or debris remains trapped within its internal workings which could lead to further problems down the line if left unchecked over time due diligence must be taken here.
Finally, after putting everything back together, make sure to test out your newly cleaned up cordless drill before actually using it for anything else. This will ensure that everything works properly still.
How to Dry Out a Cordless Drill
If your cordless drill has been exposed to water, it’s important to act quickly. Water can cause serious damage to the internal components of a cordless drill, so you need to take steps right away in order to prevent any permanent damage.
First, remove the battery from the drill and set it aside. Then use an absorbent material such as a cloth or paper towel to dry off any remaining moisture on the outside of the drill. If possible, open up all access panels and ports and use a cloth or compressed air duster (canned air) to blow out any excess moisture inside of them.
Next, place some silica gel packets inside of the drill body if possible; these will help draw out additional moisture that may be present in hard-to-reach areas within the tool’s interior components. You can also try using desiccant packs which are available at most hardware stores for this purpose as well.
Finally, turn on your hairdryer and direct its warm airflow into all openings in your cordless drill for several minutes until no more condensation appears when you look through those openings with a flashlight. This should help evaporate any remaining moisture that is still present within your tool’s internals without causing too much heat buildup which could potentially damage sensitive electronics like circuit boards or motors inside of it.
Once you have completed these steps, reassemble your cordless drill and replace its battery before testing it out again. Make sure not to leave anything wet near where you plan on charging it. With proper care and maintenance after drying out your cordless tool correctly following these instructions, you should be able to get back up running like new soon enough.
Preventing Future Water Damage
Accidents happen, and it’s not uncommon for a cordless drill to get wet. If you find yourself in this situation, don’t panic. There are steps you can take to dry out your drill and prevent future water damage.
Storage: Store your cordless drill in a cool, dry place away from direct sunlight or moisture. Make sure the battery is disconnected before storing it. This will help keep the battery from corroding over time due to exposure to moisture or heat.
Maintenance: Regularly check for signs of wear and tear on the exterior of your cordless drill as well as its internal components such as batteries and switches. Replace any worn parts immediately so that they don’t cause further damage down the line.
When working with power tools near water sources such as sinks or bathtubs, it is important to wear protective gear like goggles, gloves, long sleeves/pants etc. This will help protect you from potential hazards like electric shock or flying debris caused by an accidental splash of water onto the tool itself.
After each use (especially if there’s been contact with water), make sure you clean off any dirt or debris that may have accumulated on the surface of your cordless drill using a damp cloth and some mild detergent solution if necessary. Then, let it air-dry completely before putting it away again until next time.
Finally, always remember safety first when handling power tools around water sources; never operate them while standing in puddles of liquid or directly above open drains.
Conclusion
In conclusion, it’s important to know what to do if a cordless drill gets wet. Taking the right steps can help prevent further damage and keep your tool in good working order. If you find yourself in this situation, don’t panic – just remember to unplug the battery immediately, dry out any excess water with a cloth or towel, and then let it air-dry for at least 24 hours before attempting to use it again. With these tips in mind, you’ll be able to handle any potential water damage quickly and easily so that you can get back on track with your projects!
Are you looking for a solution to the problem of what to do if your cordless drill gets wet? Look no further! Homes Guide is here with all the answers. Our blog provides reviews and guides on home and garden products, so that you can find exactly what you need when it comes to protecting or repairing your tools. Don’t wait – check out our website today and get the information needed to keep your cordless drills working in top condition!
Paul is the type of person who never met a problem he couldn’t fix. He can always be found tinkering with something in his house, even if it isn’t broken! His tips and tricks are often shared on our site. He’s the one you call when something breaks because he has been known to improvise fixes for everything from leaky faucets to malfunctioning dryers.