Last Updated on February 9, 2023
Are you looking for a fun and creative way to make your own scrunchies? Making them with a sewing machine is an easy, cost-effective option that will have you create unique styles in no time. In this blog post, we’ll show you how to make scrunchies with a sewing machine. From gathering supplies to adding finishing touches, our step-by-step guide makes it simple and enjoyable. So grab some fabric and get ready – let’s start making those fabulous homemade scrunchies.
Table of Contents:
- Gather Your Supplies
- Cutting the Fabric
- Attaching the Elastic
- Forming the Scrunchies
- Finishing Touches
- FAQs in Relation to How to Make Scrunchies With a Sewing Machine
- Conclusion
Gather Your Supplies
Prior to commencing the creation of scrunchies, it is imperative that you have all the necessary supplies and tools. You will require a piece of fabric in your preferred pattern or hue, elastic measuring 1/4 inch wide and at least 12 inches long, scissors for cutting both the fabric and elastic, a sewing machine with thread complementing your fabric selection, pins for holding components together while stitching as well as iron if desired to press any seams.
If this is your first time making scrunchies, then it might be helpful to buy extra supplies so you don’t run out halfway through. Also, consider buying more than one type of fabric so that you can experiment with different looks. If possible, try using fabrics like cotton or linen, as they are easier to work with than synthetic materials like polyester or nylon.
It is also important to check the quality of the supplies before starting; make sure the elastic isn’t fraying or stretched out too much, as this will affect how well it holds up over time. The same goes for the fabric; look for any loose threads or weak spots which could cause problems when stitching later on. Finally, double-check that all your tools are working properly, such as scissors being sharp enough and ensuring there is enough thread in your sewing machine bobbin before beginning.
Cutting the Fabric
Measuring and cutting fabric for making scrunchies is a simple task that can be done with just a few basic tools.
Gather the Tools
Before you begin, make sure to have your scissors, measuring tape or ruler, and pins handy. If you’re using a patterned fabric, it’s also helpful to have chalk or a tailor’s marking pencil so you can mark where the cuts should go.
Measure Out Your Fabric Strips
Start by laying out your fabric on a flat surface and measure out the length of each strip that will become your scrunchie. The standard width for most scrunchies is 1 inch, but if you want yours to be wider or narrower than this measurement, then adjust accordingly. Once all of your strips are measured out, use either pins or chalk/marking pencils to indicate where each cut should go. Make sure not to place any pins too close together, as this could cause them to get caught in the scissors when cutting.
Cut Along Markings
Once all of your markings are made, take up your scissors and carefully cut along each line until all of the strips are separated from one another. When finished double, check that all pieces were cut correctly before moving on to the next step, which is assembling them into actual scrunchies.
Assemble Scrunchies
Finally, turn everything inside-out through that small gap left earlier and voila – now you have yourself some homemade DIY scrunchies ready for wearing.
Once you have cut the fabric, it’s time to attach the elastic and complete your scrunchie.
Attaching the Elastic
Attaching the elastic is a crucial step in making scrunchies. To do this, you’ll need to have your sewing machine ready and all of your supplies handy.
First, take one strip of fabric and fold it in half lengthwise with the wrong sides together. Then, place the elastic along one edge of the folded fabric so that there’s an even amount of excess on each side. Using a zigzag stitch on your sewing machine, sew along both edges of the elastic until it’s securely attached to one end of the fabric strip. Make sure to backstitch at both ends for extra durability.
Next, unfold the fabric and bring its two long edges together, so they overlap slightly over where you just sewed down the elastic. Sew them together using a straight stitch or another decorative stitch if desired – make sure not to catch any part of the elastic in this seam though. Once done, turn your scrunchie right-side out through either end and give it a good press with an iron before moving on, attaching more elastics as needed for other pieces or multi-coloured designs.
And there you have it – now you know how to attach elastics when making scrunchies. Whether you’re looking for something fun and colourful or simple yet stylish, adding some homemade accessories can be a great way to add personality to any look while also giving yourself something unique that no one else has.
Once the elastic is securely attached, you can move on to forming your scrunchies. This next step will require some basic sewing machine skills and knowledge of how to use a fabric cutter.
Forming the Scrunchies
Folding and sewing fabric into scrunchies is a fun and easy way to add some flair to your wardrobe. It’s also a great way to use up leftover fabric scraps from other projects. To get started, you’ll need scissors, pins, elastic, thread in the same colour as your fabric, and of course, the fabric itself.
Once you have all of your supplies ready to go, it’s time to cut out the strips for each scrunchie. Measure out two pieces of fabric that are about 4 inches wide by 18 inches long for each scrunchie. Then pin them together with right sides facing inward before cutting them out along the edges with scissors or a rotary cutter.
Next comes attaching the elastic – this will be what holds everything together when you’re done. Take one end of an 8-inch piece of elastic and fold it over 1/4 inch at one end of the strip before pinning it down securely. Sew along this edge using a straight stitch on your sewing machine while stretching slightly so that it fits snugly against the fabric strip without bunching up too much. Repeat this process on both ends until all four corners are secured with elastic bands.
Folding and stitching the fabric into scrunchies is a fun and easy way to add some flair to your wardrobe. To complete this project, you will need scissors, pins, elastic, thread in the same colour as your fabric, and of course, the fabric itself. Once all of these supplies are ready to go, fold each strip in half lengthwise with the wrong sides facing outward and secure with pins if needed. Then stitch along both long edges using a straight stitch on your sewing machine but leave about 1/2 inch open at one end for turning inside out later on. After finishing stitching around both edges, carefully turn inside out through that opening left earlier, then sew across the bottom edge where the opening was left earlier as well as the top edge near folded area just enough times so that everything stays in place once turned back outside again. Finally, give each scrunchie a few good tugs here and there just to make sure everything looks even better afterwards – you now have yourself set handmade scrunchies ready wear show off to friends and family alike.
And don’t forget those finishing touches either – adding ribbons, bows, buttons or whatever else might take your fancy to help complete the look and make it even more unique and special than it already is. So go ahead and try creating your own scrunchies today and see how creative you can get with the result.
Once the scrunchies have been formed, it’s time to add the finishing touches to make them look perfect.
Finishing Touches
Adding decorative touches to your scrunchies is a great way to customize them and make them unique. To start, you can use ribbons of different colours or patterns for an eye-catching look. Cut the ribbon into strips that are about two inches long, then tie each strip around the scrunchie in a knot. You can also sew on buttons for extra flair – simply stitch them onto the fabric with matching thread. For something more intricate, try using beads or sequins to create interesting designs. If you’re feeling creative, why not combine several of these ideas?
You could even add charms like stars or hearts if you want to give your scrunchie some personality. Start by tying one end of a jump ring onto the elastic band at one end of the scrunchie before attaching it securely with pliers. Then attach any charm you desire and close up the jump ring again with pliers before trimming off any excess wire sticking out from either side. Your charm should now be firmly attached and ready for display.
If all else fails, don’t forget that sometimes less is more – just leave it plain if that’s what suits your style best. No matter how simple or complex your design may be, the finishing touches are always sure to bring life to any project and make it truly yours, so get creative and have fun.
FAQs in Relation to How to Make Scrunchies With a Sewing Machine
How do you sew scrunchies step by step?
Sewing scrunchies is a simple and fun project that anyone can do. To get started, you’ll need some fabric scraps or an old t-shirt, scissors, thread, and a safety pin. First, cut the fabric into strips about 1 inch wide and 12 inches long. Then fold each strip in half lengthwise with the wrong sides of the fabric facing outwards. Sew along the open edge using a straight stitch on your sewing machine or by hand stitching it closed. Finally, tie one end of the strip to create a loop then secure it with a safety pin while you wrap it around itself until you reach your desired size scrunchie. Tie off both ends securely and snip off any excess threads – now you have your own handmade scrunchie.
How do you make a scrunchie with a sewing machine and hair tie?
To make a scrunchie with a sewing machine and hair tie, start by cutting the fabric into two equal-sized strips. Fold each strip in half lengthwise and sew along the long edges to create two loops. Then, slide one loop through the other so that they overlap. Place the hair tie inside both loops and pin it in place. Sew around all four sides of the scrunchie, making sure to backstitch at each end for extra durability. Finally, trim off any excess fabric, and your scrunchie is ready to wear.
How do you finish a scrunchie on a sewing machine?
Sewing a scrunchie on a sewing machine is easy. First, make sure your fabric is cut into two strips that are each about 1.5 inches wide and 10-12 inches long. Place the right sides of the fabric together and sew along one side with a straight stitch. Then turn the fabric inside out so that the seam you just sewed is hidden on the inside. Finally, wrap one end of the fabric around itself to form a loop and sew it in place using either an overcast or zigzag stitch for extra security. And there you have it – your very own handmade scrunchie.
Conclusion
With the right supplies, a few simple steps, and some creativity, you can make your own unique scrunchies in no time. Whether you’re looking to add some flair to your wardrobe or just want something new to try out, making scrunchies with a sewing machine is definitely worth giving a shot at. So get creative and have fun – happy scrunchie-making.
Paul is the type of person who never met a problem he couldn’t fix. He can always be found tinkering with something in his house, even if it isn’t broken! His tips and tricks are often shared on our site. He’s the one you call when something breaks because he has been known to improvise fixes for everything from leaky faucets to malfunctioning dryers.