Last Updated on February 16, 2023
Table of Contents:
- What Causes Electric Showers to be Cold?
- Troubleshooting Tips for Cold Electric Showers
- Preventing Future Problems with Your Electric Shower
- Enjoy Hot Water in Your Bathroom
What Causes Electric Showers to be Cold?
Low Water Pressure
Low water pressure is one of the most common causes of electric showers running cold. This occurs when there isn’t enough pressure in the pipes to push hot water up to your shower head. If you’re experiencing this issue, it’s likely that you’ll need to increase the flow rate of your incoming water supply or replace any faulty components in your plumbing system.
A faulty thermostat can also cause an electric shower to run cold. The thermostat regulates the temperature of the water and if it’s not working correctly, then it won’t be able to heat up the water properly before it reaches your shower head. To check whether this is causing a problem, try adjusting the thermostat settings on your unit and see if that helps improve things. If not, then you may need to have a professional look at it for further diagnosis and repair work.
Broken Heating Element
Another possible cause of an electric shower running cold could be a broken heating element inside its casing. This component heats up the incoming cold water before passing through into your showerhead, so if something goes wrong with this part, you won’t get hot enough temperatures coming out from yours either. You’ll need to take apart your unit and inspect all parts carefully – including wiring connections – in order to identify any faults here as well as replacing any broken elements with new ones where necessary.
Common causes of electric showers running cold include a lack of hot water, low pressure, and a malfunctioning thermostat. To ensure your shower is up to temperature, follow the troubleshooting tips outlined in the next section.
Troubleshooting Tips for Cold Electric Showers
When it comes to electric showers, a cold shower is the last thing you want. Fortunately, there are several troubleshooting tips that can help you get your electric shower running hot again.
Check Water Pressure
If your water pressure is too low, then this could be causing your electric shower to run cold. To check if this is the case, try turning on another tap in the house and see if it has good pressure or not. If it does not have good pressure either, then you may need to contact a plumber for assistance with increasing the water pressure in your home.
Another possible cause of an electric shower running cold could be due to a faulty thermostat. If this is what’s causing the problem, then replacing the thermostat should fix it. However, before attempting any repairs yourself, make sure that you turn off all power sources connected to the unit first, as working with electricity can be dangerous without proper safety precautions being taken beforehand.
Clean Heating Element
The heating element inside an electric shower can become clogged over time which will prevent it from providing adequate heat for a warm shower experience. To clean out any debris blocking up its pathways, use a vinegar and baking soda solution and scrub away at any buildup until clear again. After that, replace the heating element back into its original position and test it out by turning it on once more.
If you’ve tried all the troubleshooting tips and your electric shower is still cold, it may be time to call in a professional. In the next section, we’ll look at how to prevent future problems with your electric shower.
Preventing Future Problems with Your Electric Shower
Electric showers are a popular choice for many UK households, providing an efficient and cost-effective way to get hot water. However, like any other appliance in your home, electric showers require regular maintenance and care to ensure they continue working properly. Here are some tips on how you can prevent future problems with your electric shower:
Cleaning the Shower Head: The shower head should be cleaned regularly to remove any limescale or dirt build-up that could clog it up over time. To do this, simply fill a bucket with warm water and add some vinegar or lemon juice, which will help dissolve the limescale deposits. Soak the shower head in this solution for around 30 minutes before rinsing off with clean water.
Checking for Leaks: It’s important to check all parts of your electric shower for leaks, as even small ones can cause damage if left unchecked. Check around the taps, valves and hoses connected to the unit as well as underneath where it is installed – if there is standing water, then you may have a leak somewhere that needs fixing immediately.
Testing Temperature Regularly: You should also test the temperature of your electric shower every few months by running it at full power until it reaches its maximum heat setting (usually indicated by an LED light). If you find that it isn’t reaching its desired temperature, then you may need to adjust either the thermostat or flow rate settings accordingly – but always make sure these changes are done safely following manufacturer instructions.
By following these simple steps on a regular basis, you can help keep your electric shower running smoothly and avoid any unexpected issues in the future.
Enjoy Hot Water in Your Bathroom
In conclusion, electric showers can be a great way to enjoy hot water in the comfort of your own home. However, it’s important to understand why they sometimes become cold and how you can troubleshoot common problems with your electric shower. With some simple maintenance and regular checks, you should be able to keep your electric shower running at its optimal temperature for many years to come!
Paul is the type of person who never met a problem he couldn’t fix. He can always be found tinkering with something in his house, even if it isn’t broken! His tips and tricks are often shared on our site. He’s the one you call when something breaks because he has been known to improvise fixes for everything from leaky faucets to malfunctioning dryers.