Last Updated on February 9, 2023
Do you need to hem your jeans but don’t have a sewing machine? No problem. Hemming without the use of a sewing machine is easier than you think. From no sew methods like iron-on and fabric glue to hand stitching and safety pins, we’ll show you how to get that perfect fit with ease. So if it’s time for some DIY denim alterations, then read on as we explain exactly how to hem jeans without a sewing machine.
Table of Contents:
- No Sew Hemming
- Iron-On Hemming
- Fabric Glue Hemming
- Hand Stitching Hemming
- Safety Pins Hemming
- Conclusion
No Sew Hemming
No sew hemming is a great way to alter the length of your jeans without having to break out the sewing machine. It’s quick, easy and doesn’t require any special skills or tools. All you need is some no-sew adhesive tape, fabric glue and a pair of scissors.
First, measure how much material needs to be removed from the bottom of your jeans. Cut off this excess material with sharp scissors and discard it. Next, apply strips of no-sew adhesive tape along both sides of the raw edge where you cut off the excess material. This will help keep everything in place while you work on hemming your jeans.
Now it’s time for fabric glue. Squeeze a generous amount onto one side of the raw edge that was just taped up and press firmly against its other side so that they stick together nicely. Make sure there are no gaps between them, as this could cause an uneven finish when finished hemming your jeans. Allow enough time for it to dry completely before moving on to step four – trimming away any excess fabric glue around edges if necessary (this should only take about 10 minutes).
Finally, use an iron set at low heat setting (or according to instructions) over top of each section where you applied fabric glue until all sections have been pressed down securely into place. This will ensure a professional looking finish. And there you have it – perfectly hemmed jeans without ever having used a needle or thread.
No sew hemming is a great option for those who don’t have access to a sewing machine, but if you want an even more permanent solution, iron-on hemming may be the way to go.
Iron-On Hemming
Iron-on hemming is a great way to quickly and easily hem jeans without having to use a sewing machine. It’s also an ideal solution for those who don’t have access to one or are just starting out with DIY projects. All you need is some iron-on hemming tape, which can be found in most craft stores or online.
To get started, lay your jeans flat on the floor and measure the length you want them to be. Then cut off any excess fabric at the bottom of each leg using scissors or pinking shears. Next, place the iron-on hemming tape along the edge of each leg where you made your cuts and press it down firmly with an iron set on low heat (make sure not to leave it too long as this could damage your jeans).
Once both legs are done, turn them inside out so that all of the edges are facing up and check that they look even before pressing down again with an iron set on medium heat for about 10 seconds per side. Finally, trim away any excess material from around the edges if needed before wearing.
Iron-on hemming is easy enough for anyone to do at home, no special skills required. Plus, it’s much cheaper than taking your jeans into a tailor every time they need altering. So why not give it a try? You’ll soon find yourself creating perfectly tailored pieces in no time at all.
Iron-on hemming is a great option for those who don’t have access to a sewing machine, but it’s not the only way to get your jeans hemmed. Fabric glue hemming is another easy and effective solution.
Fabric Glue Hemming
Fabric glue is a great way to hem your jeans without the need for a sewing machine. It’s easy, fast and requires minimal effort – perfect for those of us who don’t have much time or patience. Here are some tips on how to get started.
What You’ll Need
To begin, you will need fabric glue, scissors, an iron and a ruler or measuring tape. If you want to be extra careful when cutting your fabric, you can also use tailor’s chalk or pins.
Preparing Your Jeans
Before applying any glue, make sure that your jeans are clean and free from dirt and debris so that the adhesive will stick properly. Then measure the length of the hem that you want to create using either a ruler or measuring tape; this will help ensure that both sides of the hem are even in size once it has been glued down. Once measured out, mark where you would like your new hemline with tailor’s chalk (or pins if preferred).
Cutting & Ironing The Hem
Now it’s time to cut off any excess material at the bottom of your jeans along the marked line using sharp scissors; try not to cut too close as this could cause fraying later on. Once trimmed up nicely, press down firmly on each side of the newly-cut edge with an iron set at medium heat – this helps flatten out any creases before gluing begins.
Applying The Glue
Now comes perhaps one of most important steps – applying fabric glue onto both edges of denim evenly but sparingly; make sure not to overdo it otherwise there may be issues when trying to remove excess adhesive later on. Allow around 10 minutes for drying before moving onto next step…
Finally, fold over each side so they meet in the middle then press down firmly again with an iron set at low heat until dry. Allow it to sit overnight until completely dry before wearing them out proudly. With these simple steps followed correctly you should now have yourself perfectly hemed jeans without having used a single stitch – congratulations.
Hand Stitching Hemming
Hand stitching hemming is a traditional method of creating neat and secure hems on jeans, skirts, or any other garment. It requires no special tools or machines, just some basic sewing supplies and patience.
The first step in hand stitching a hem is to measure the desired length of the hem. To do this accurately, use a measuring tape and mark the exact spot where you want your new hem to end with the tailor’s chalk or pins. Once you have marked off the desired length of your new hem, it’s time to start sewing.
To begin hand stitching your new hemline, thread a needle with strong thread that matches your fabric colour as closely as possible. Start by making small stitches at one end of the fabric edge that will become part of your finished seam line. Make sure each stitch is tight enough so that it won’t come undone but not too tight so that it puckers up when you pull on it slightly. Continue making these tiny stitches until you reach the other side of your marked-off area for the new hemline.
Hemming jeans by hand stitching is a great way to get the perfect fit and length, but if you don’t have access to a sewing machine, safety pins can also be used for an easy alternative.
Safety Pins Hemming
Safety pins are a great way to temporarily hold up the hems of your jeans until you can get them professionally tailored or sew them yourself with a sewing machine. It’s an easy and quick fix that doesn’t require any special tools, making it ideal for those who don’t have access to a sewing machine or the time to learn how to use one.
To begin, lay out your jeans on a flat surface and pin the hem in place using safety pins. Make sure they are securely fastened so they won’t come undone while wearing them. If necessary, you can add additional pins along the length of the hem for extra security. Once all of your safety pins are in place, try on your jeans and adjust as needed until you’re happy with how they fit.
When it comes to removing safety pins from the fabric after use, be careful not to pull too hard, as this could damage the material or cause it to tear. Instead, carefully slide each pin off one at a time by pushing down on its head and pulling away from the fabric gently until it is free from its grip. This will help prevent any snags or tears in your clothing when taking off the safety pins afterwards.
If you’re looking for more than a temporary hemming solution, there are other options available such as iron-on hems, which provide permanent results without having to sew anything together manually; fabric glue that works well with delicate fabrics like silk; hand stitching requiring some basic knowledge of needlework; and no-sew hems allowing neat edges without any special equipment.
Whichever method you choose for hemming jeans – whether that’s using safety pins or something else – make sure that whatever solution you go with works best for both your lifestyle needs and budget requirements before committing fully.
Conclusion
No matter which method you choose, hemming jeans without a sewing machine is an easy and cost-effective way to get the perfect fit. Whether you opt for no sew hemming, iron-on hemming, fabric glue hemming, hand stitching or safety pins hemming – all of these methods can help you achieve the desired results. So go ahead and give it a try – with just a few simple steps, you’ll be able to easily hem your jeans without using a sewing machine.
Paul is the type of person who never met a problem he couldn’t fix. He can always be found tinkering with something in his house, even if it isn’t broken! His tips and tricks are often shared on our site. He’s the one you call when something breaks because he has been known to improvise fixes for everything from leaky faucets to malfunctioning dryers.